MLUH MLUH installation Easiest-to-install hybrid product available on the market. Installation features Installation video and manual With a smartphone the QR code attached to the spool can be scanned and it takes you directly to the relevant internet site where the installation manual or installation video can be chosen. MLUH mounting bracket The MLUH mounting bracket is fixed to the mast or wall before the MLUH is lifted. Unspooling The MLUH is supplied on a double-flange reel which allows for easy and straight-forward unspooling while lifting the cable up the mast. Pulling With a pre-laced hosting grip below the MLUH connector head, the cable system is lifted up to the mast. Hook-in MLUH head at mounting bracket After the protection air bubble bag is removed, the MLUH connector head can be hooked-in to the mounting bracket. RRH connection The remote radios are connected with fiber optic jumpers, which are terminated with Q-ODC/ Q-ODC-12 plug connectors and RRH compatible interfaces. The power jumpers are terminated with a rugged circular plastic plug connector and are blunt cut on the RRH side. Earthing The MLUH head has an integral earth point which can be connected to an earth lead with M8 ring terminal. Optional, the shielding of the hybrid cable can be grounded with standard grounding kits. Base station connection The pre-terminated LC fiber optic connectors are protected with a IP65 protection tube. Once the protection tube is screwed-off, the installer has access to the fiber optic breakout cables and the individual copper/ground wires. Overlength management The hybrid cable has 2 rip cords below the jacket to allow easy stripping of the jacket over a distance of several meters. This allows the installer to cut the excess length of the copper wire while the overlength of the pre-terminated fiber cable is stored inside the base station or in a overlength box. HUBER+SUHNER Wireless infrastructure 85
Print
Download PDF file
Build your own flipbook
