Installation Manual Fiber-to-the-antenna box (FTTA) Large FTTA Box for up to 24 RRH Description HUBER+SUHNER’s FTTA box large is designed for flexible, easy and quick deployment of up to 24 Remote Radio Heads. It’s design allows for installation using MASTERLINE Classic, a factory-terminated cable assembly with up to 48 bundled fibers. All fiber management components, LC duplex adapters, cable glands and mounting brackets are pre-installed. Installation MASTERLINE Classic One knock-out hole, Ø 26mm for MASTERLINE Classic 24 fibers, 36 fibers or 48 fibers Two knock-out holes, Ø 16mm for MASTERLINE Classic 12 fiber 1 Knock-out the hole with Ø 26mm for MASTERLINE Classic 24 fibers, 36 fibers or 48 fibers and / or knock-out the two holes Ø 16mm for 2x MASTERLINE Classic 12 fibers. 2 Remove nut from MASTERLINE Classic. HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of tools and accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product warranty provided by HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these products. For advice concerning the general handling of these products please contact HUBER+SUHNER. HUBER+SUHNER is certified according to EN(AS) 9100, ISO 9001, ISO 14001, ISO/TS 16949 and IRIS. Waiver: Fact and figures herein are for information only and do not represent any warranty of any kind. Document: DOC-0000682956 / Rev. C / Date of publication: 14.01.2021 / uncontrolled copy www.hubersuhner.com Page 1/4
Print
Download PDF file
Build your own flipbook
