Page 4 of 55 INSTALLATION MANUAL RRH END OF ASSEMBLY Step 1 The current installation manual is available on hubersuhner.com. Please scan the QR code to download the latest version of the installation manual. The QR-code label is located on the cardboard frame pallet or the flange of the cable reel. Step 2 Remove the mounting bracket attached to the spool. In the case of cardboard frame pallet packaging, the bracket is located in the cardboard frame pallet. Secure the mounting bracket with hose clamps (when fitting to a pole/mast) or screws (when fitting to a wall). We recommend you use the quick hose clamps by HUBER+SUHNER and tighten the clamps using a torque of 4.0 Nm. item no. 84076411 (pole Ø 30 – 155mm) item no. 84076412 (pole Ø 60 – 500mm) HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of tools and accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product warranty provided by HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these products. For advice concerning the general handling of these products please contact HUBER+SUHNER.
Download PDF file
Build your own flipbook