INSTALLATION MANUAL HUBER+SUHNER AG Fiber Optics M ASTER L INE U ltimate H ybrid High Voltage 4/12 (MLU HV 4/12) blunt cut at BTS side DOC-0000803885 Rev B May 13, 2021 Page 1 of 12 MASTERLINE Ultimate Hybrid High Voltage 4/12 (MLUH HV 4/12) blunt cut at BTS side TABLE OF CONTENT • SAFETY NOTES . 1 • HANDLING OF THE CABLING SYSTEM. 1 • HANDLING OF FIBER OPTIC ASSEMBLIES . 1 • RRH END OF ASSEMBLY . 2 • BASE STATION END OF ASSEMBLY . 9 • FIBRE OPTIC ALLOCATION . 11 • POWER CODING . 11 • DISMANTLING . 12 • REVISION HISTORY . 12 SAFETY NOTES Installation and maintenance work on this device may only be carried out by an authorized electrician. National laws and regulations must be observed during installation. The housing and the components used must be checked for exterior damage prior to installation. If the cabling system is defective, it may not be used. Please contact HUBER+SUHNER, if there are any doubts about the condition of the cabling system. HANDLING OF THE CABLING SYSTEM To avoid any damage due to improper installation, please keep in mind below points: • AVOID any additional stress on connector head by twisting or bending when routing or locating it • AVOID installation path around any sharp objects • AVOID uncontrolled knocking of connector head on any hard object • AVOID any contact of connector head with any additional substance such as glue/oil/fat etc. unless prior authorization is given by HUBER+SUHNER AG See also “ User handling manual for cables and cable systems ” on www.hubersuhner.com/en/support HANDLING OF FIBER OPTIC ASSEMBLIES In order to guarantee the performance, fiber optic assemblies need to be treaded carefully and with attention on the minimum bend radius and never exposed to dirt. See also “ User handling manual for cables and cable systems ” on www.hubersuhner.com/en/support HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of tools and accessories other than the ones recommended in the latest revision of this installation manual. Any installation performed by unqualified personnel voids the product warranty provided by HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these products. For advice concerning the general handling of these products please contact HUBER+SUHNER.
PDF-Datei herunterladen
Erstellen Sie Ihren eigenen Katalog