Installation Manual Power-to-the-Antenna Box (PTTA) Power distribution with circuit breaker and surge protection type 1/2 Circuit diagram Safety notes Installation and maintenance work on this device may only be carried out by an authorized electrician. National laws and regulations must be observed during installation. The housing and the components used must be checked for exterior damage prior to installation. If the device is defective, it may not be used. HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of tools and accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product warranty provided by HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these products. For advice concerning the general handling of these products please contact HUBER+SUHNER. HUBER+SUHNER is certified according to EN(AS) 9100, ISO 9001, ISO 14001, ISO/TS 16949 and IRIS. Waiver: Fact and figures herein are for information only and do not represent any warranty of any kind. Document: DOC-0000458258 / Rev. B / Date of publication: 14.01.2021 / uncontrolled copy www.hubersuhner.com Page 3/8
Download PDF file
Build your own flipbook