HUBER+SUHNER

HUBER+SUHNERD-Marc D-Marc Ethernet Network Interface Linecard CR-DLXX05S1T1-0 Overview • The CR-DLXX05S1T1-0 is a manageable Ethernet network interface linecard to fit the emerging deployment needs of optical networks. • The CR-DLXX05S1T1-0 is to be plugged to the CR-DCCH16 chassis. • The CR-DLXX05S1T1-0 connects electrical Ethernet-based networks to optical networks easily and cost effectively. • The CR-DLXX05S1T1-0 can be used in combination with the CR-DCXX05S1T1-0 as remote demarcation device. • Management via SNMP or web interface. Applications • Media conversion (10/100/1000Base-T to 1000Base-X or 10/100Base-T to 100Base-FX). • Can be combined with wavelength division multiplexing. • Demarcation. Maintenance levels • Complies with IEEE 802.3 ah OAM standard. Features • Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-X (CR-DC1005S1T1-0). • One 10/100/1000Base-T port (CR-DC1005S1T1-0) resp. 10/100Base-T port (CR-DC0105S1T1-0). • 1000Base-X SFP port (CR-DC1005S1T1-0) resp. 100Base-FX SFP port (CR-DC0105S1T1-0). • Store and forward switching mechanism. • Auto crossover for MDI/MDIX in TP port. • Auto negotiation in TP port. • Supports Power/FDX/FX and TP link activity/FDX/TP speed/status/LED. • Supports 128kb packet buffer • Supports 4k MAC addresses • Supports jumbo frame up to 9728 bytes. • Complies with IEEE 802.1p Priority. • Supports QoS Classification based on TOS. • Supports Q-in-Q VLAN tunnelling. • Supports bandwidth control. • To be plugged to CR-DCCH16 chassis. • Manageable via CR-DCCH16 chassis module management. • Local port management function: o State monitor – model/media/link/speed/duplex/activity o Enhanced port monitor – Traffic counter/jitter and latency measurement o Port configuration – auto/speed/duplex/flow control/bandwidth control/broadcast storm • Remote port management function: o State monitor – model/media/link/speed/duplex/activity/power o Port configuration – auto/speed/duplex/flow control • Supports in-band module F/W upgrade. Rev. A / VO0028_3.1 HUBER+SUHNER is certified according to EN(AS) 9100, ISO 9001, ISO 14001, ISO/TS 16949 and IRIS. Waiver: Facts and figures herein are for information only and do not represent any warranty of any kind. cubeoptics.com Page 1/2Page 2