Installation Manual Fiber-to-the-Antenna Box (FTTA) FTTA box for up to 18 RRH 5 Tighten the nut Connect LC duplex connectors at the right side of the patch plate. Connection of the fiber optic jumper Three M32 cable glands with pre-splitted 6-fold sealing for 18 fiber optic jumper cable Ø 4.8 - 7.0 mm 6 Open cable gland and remove sealing. Feed LC duplex connectors of the jumper 7 to 12 through gland nut and gland. 7 Push the seal onto the fiber optic cables and push the seal back into the gland. 8 Connect the LC duplex connector 7 to 12 at the correspondent LC adapter. Tighten the cable gland. HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of tools and accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product warranty provided by HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these products. For advice concerning the general handling of these products please contact HUBER+SUHNER. HUBER+SUHNER is certified according to EN(AS) 9100, ISO 9001, ISO 14001, ISO/TS 16949 and IRIS. Waiver: Fact and figures herein are for information only and do not represent any warranty of any kind. Document: DOC-0000684002 / Rev. B / Date of publication: 14.01.2021 / uncontrolled copy www.hubersuhner.com Page 3/4
Download PDF file
Build your own flipbook